thermio™ comfort – famoso 601 rf Set

ITEM-NO. 04.53.0005.1 / EAN-CODE 4010940040505

famoso 601 rf Set

PRODUCT DESCRIPTION

The famoso 601 rf is a programmable room thermostat with electronic temperature controller and analogue time switch with day program and a very short switching time of just 15 minutes. The wireless technology enables individual placement in the room without the laying of electrical cables and is especially suitable for use in new buildings or for retrofitting. The signal and control accuracy is ensured by the high radio range of up to 30 metres inside buildings. Individual comfort temperatures can be set via two room temperature controls, which can be selected via a dial. The battery status is monitored and displayed by a status LED with the required battery change. The famoso 601 rf is distinguished by a simple and modern design, which allows it to be easily integrated into any room.

DOCUMENTS & DOWNLOADS

Instructions-famoso-601-rf-Set


BENEFITS

  • Monitoring the battery status and display with the required battery change
  • Increased comfort through wide temperature control range
  • The frost protection function prevents the freezing of radiators or icing of piping, even when switched OFF
  • Long battery life through efficient energy management
  • Surface mounting for easy and quick installation
  • The wireless radio technology allows individual placement in rooms without laying electric cables
  • Signalling and control accuracy ensured through high frequency radio signal range of up to 30 metres inside buildings
  • Indication of the system state through the systemstate and radio signal strength LEDs
  • Simple and modern design

APPLICATIONS

  • Heating systems
  • Underfloor heating
  • Radiators
  • Electric heaters
  • Motorised valves
  • Actuators

SPECIFICATIONS

famoso 601 rf

Electrical Data

Supply voltage
DC 3 V (2 x 1.5 V AA LR6 alkaline battery)
Battery life
1 year (depending on switching frequency)
Control function
Heating
Control type
2- Point (ON/OFF)
Hysteresis
±0,25 K ... ±0,5 K
Control range
+5 °C (frost protection)
 
+5 °C ... +30 °C
control accuracy
± 2.5 seconds/day at +25 °C
Control period
5 ... 30 minutes

Communication method

Radio signal
868,3 MHz
Range
30 m (inside building)
Coding
> 16.8 mil.
Output power
< 1 mW

Operating specifications

Operating mode
Auto mode (program dependent)
 
Night temperature mode
Manual switch
Auto temperature
 
Control temperature 1
 
Control temperature 2
Program
Daily program (ON/OFF)

Display and format

Time format
24-hour format
Shortest switching time
Program time 15 minutes
Clock
Analogue hands
Status indicator
Battery state

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
-5 °C ... +45 °C
Temperature (storage)
-20 °C ... +55 °C

General specifications

Colour
White
Weight
250 g
Material
Plastic ABS
Dimension
75 x 158 x 36,5 mm
Mounting
Surface mounting (4-hole mounting on flush-mounted box)

Compliance with standards

ErP class
I
ErP function
ON/OFF room thermostat
ErP Description
A room thermostat that controls the ON/OFF operation of a heater.
ErP contribution to seasonal characteristic space heating energy efficiency
1 %
Protection type
IP20
Protection class
II, according to corresponding mounting
Approval mark
CE
Standards and guidelines
EN 60730-1
 
EN 60730-2-7
 
EN 60730-2-9

RecUno rf

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Curret output
Changeover, potential-free, opening width < 3 mm
Current capacity - ohmic load
5 A / 250 V AC
Current capacity - inductive load cos.phi 0.6
1 A / 250 V AC
Switching capacity - minimal
100 mA / 6 V
Rated impulse withstand voltage (Uimp)
4 kV

Power connection

Device
Latching screw with wire protection max. 1.5 mm²

Communication method

Wired
2-wire
Radio signal
868,3 MHz
Range
30 m (inside building)
Coding
> 16.8 mil.
Output power
< 1 mW
Status indicator
LED

Display and format

Status indicator
Status display heating (LED)

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
-5 °C ... +45 °C
Temperature (storage)
-20 °C ... +55 °C

General specifications

Colour
White
Weight
113 g
Material
Plastic ABS
Dimension
85 x 107 x 35 mm
Mounting
Surface mounting (4-hole mounting on flush-mounted box)

Compliance with standards

Protection type
IP20
Protection class
II, according to corresponding mounting
Pollution degree
2
Approval mark
CE
Standards and guidelines
EN 60730-1
 
Mode of operation and additional properties: Type 1.B

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS