Accessory – Motorized Valve 2PV2

ITEM-NO. 17.30.0001.1 / EAN-CODE 4010940045197

Motorized Valve 2PV2

PRODUCT DESCRIPTION

2PV2 is a 22 mm two-way valve with spring-loaded return and actuator and is used to control the water flow. It is attached via the inlet and outlet sides according to the direction of fl ow indicator and can be set to manual or automatic by means of the adjusting lever. To allow the heating pipeline system to be filled, drained or bled manually, the adjusting lever is pushed down with slight pressure into the locked position. Automatic adjustment is enabled by a control signal that is sent along the wire. For this purpose, the adjusting lever is released from the locked position once the heating pipeline system has been filled and bled.

BENEFITS

  • Quick and simplified installation due to a 1.2 m cable with wires with standard colour coding, a potentialfree auxiliary switch and a manual lever for filling and draining the pipe system
  • Flexible installation through compact construction for use in cramped ambient conditions
  • Easy to replace in the event of a fault without draining the pipe system due to a valve motor that can be removed at the push of a button

APPLICATIONS

  • Controlling and shutting OFF hot water through a heating system

SPECIFICATIONS

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Current capacity - ohmic load
3 A / 230 V AC
Current capacity - inductive load cos.phi 0.6
1 A / 250 V AC
Rated impulse withstand voltage (Uimp)
4 kV
Power consumption
5 VA
Control type
2- Point (ON/OFF)

Power connection

Device
Cable length 1.2 m (heat-resistant and flexible)

Operating specifications

Manual switch
ON/OFF/AUTO

Display and format

Shortest switching time
Opening 12 seconds
 
Closing 5 seconds

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
±0 °C ... +50 °C
Temperature (storage)
±0 °C ... +50 °C

General specifications

Drive type
Synchronous
Weight
900 g
Material
Brass
Dimension
107 x 68 x 102 mm
Mounting
Heating pipeline system
Medium
Hot water
 
Cold water
Connection diameter
22 mm
Flow factor
3,5 m³/h
Maximum differential pressure
0,7 bar
Maximum static pressure
8,6 bar
Maximum operating pressure
0,7 bar
Temperature of medium (in operation)
+5 °C ... +100 °C

Compliance with standards

Protection type
IP20
Protection class
I, after appropriate mounting
Pollution degree
2
Approval mark
CE
Standards and guidelines
EN 60730-1
 
Mode of operation and additional properties: Type 1.B

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS