thermio™ essential – thermio™ 713

ITEM-NO. 04.46.0018.1 / EAN-CODE 4010940041342

thermio™ 713

PRODUCT DESCRIPTION

The thermio™ 713 is a room thermostat with electronic temperature controllers. Both the current and target temperatures are conveniently shown, even in low light conditions, via a display. The heating or cooling control type can be switched using a selection switch. In addition, the fan speed of the system can be adjusted according to individual needs using the 3-step selection switch. This thermio™ is distinguished by its very flat design.

DOCUMENTS & DOWNLOADS

Instructions-thermio-713


BENEFITS

  • Increased comfort through wide temperature control range
  • The frost protection function prevents the freezing of radiators or icing of piping, even when switched OFF
  • Utilisation efficiency by high control accuracy
  • Surface mounting for easy and quick installation

APPLICATIONS

  • Heating or cooling systems
  • Underfloor heating
  • Radiators
  • Electric heaters
  • Cooling ceilings
  • Motorised valves
  • Actuators
  • 3-stage fan coils

SPECIFICATIONS

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Curret output
Changeover, potential-free, opening width < 3 mm
Current capacity - ohmic load
6 A / 250 V AC
Current capacity - inductive load cos.phi 0.6
2 A / 250 V AC
Control function
Heating or cooling
Control type
2- Point (ON/OFF)
Hysteresis
±0.4 K / ±0.6 K
Control range
+5 °C (frost protection)
 
+5 °C ... +35 °C
control accuracy
±1 °C (20 K/Hour)

Power connection

Device
Screw terminal with wire protection max. 2.5 mm²

Communication method

Wired
2-wire

Operating specifications

Manual switch
3-stage speed fan coil
 
Heating or cooling

Display and format

Resolution
Room temperature 0.1 °C
 
Target temperature 0.5 °C
Display Update
every 10 seconds
Display lighting
Light blue
Room temperature display
+0 °C ... +40 °C

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
-5 °C ... +45 °C
Temperature (storage)
-20 °C ... +55 °C

General specifications

Colour
White
Weight
128 g
Material
Plastic ABS
Dimension
82 x 111 x 26 mm
Mounting
Surface mounting (4-hole mounting on flush-mounted box)

Compliance with standards

ErP class
I
ErP function
ON/OFF room thermostat
ErP Description
A room thermostat that controls the ON/OFF operation of a heater.
ErP contribution to seasonal characteristic space heating energy efficiency
1 %
Protection type
IP30
Protection class
II, according to corresponding mounting
Approval mark
CE

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS