thermio™ eco – thermio™ eco BI1S

ITEM-NO. 04.33.0023.1 / EAN-CODE 4010940045142

thermio™ eco BI1S

PRODUCT DESCRIPTION

The BI1S is an immersion heater timer with daily program. It allows individual adjustment of the heating period within 24 hours, every 15 minutes in order to avoid expensive peak hours. It offers timed control of electronic immersion heaters with a performance of up to 3.000 watts. Switching between the operating modes automatic, Fixed ON and OFF can be made using a hand switch. The BI1S is distinguished by a simple and modern design with a low profile and easy mounting.

DOCUMENTS & DOWNLOADS

Instructions-thermio-eco-BI1S


BENEFITS

  • Surface mounting for easy and quick installation
  • Optimal tamper protection through sealable housing
  • 96 tappets allow the system to be switched ON/OFF at the current time with up to 48 ON and 48 OFF switching times

APPLICATIONS

  • Single immersion heater to 3.000 watts
  • Heating systems
  • Pumps
  • Motors
  • Machines
  • Universally usable

SPECIFICATIONS

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Curret output
Changeover, potential-free, opening width < 3 mm
Current capacity - ohmic load
16 A / 250 V AC
Current capacity - inductive load cos.phi 0.6
8 A / 250 V AC
Switching capacity - minimal
100 mA / 20 V AC/DC
Load incandescent / halogen lamp
1.300 VA
Rated impulse withstand voltage (Uimp)
4 kV
Power consumption
1 VA
Accuracy
Mains synchronised
Time basis
Synchronous (network frequency)

Power connection

Device
Screw terminal with wire protection max. 2.5 mm²

Operating specifications

Manual switch
ON/OFF/AUTO
Channels
1
Tempering protection
Lead-sealable
Program
Daily program (ON/OFF)

Display and format

Shortest switching time
ON/OFF 15 Minutes
 
Program time 15 minutes
Clock
Analogue hands

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
-20 °C ... +85 °C
Temperature (storage)
-20 °C ... +55 °C

General specifications

Colour
White/Grey
Weight
160 g
Material
Thermoplastics, self-extinguishing & high-temperature resistant
Mounting
Surface mounted

Compliance with standards

Protection class
I, after appropriate mounting
Pollution degree
2
Approval mark
CE
Standards and guidelines
EN 60730-1
 
EN 60730-2-7
 
Mode of operation and additional properties: Type 1.B

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS