thermio™ eco – thermio™ eco C1

ITEM-NO. 04.07.0005.1 / EAN-CODE 4010940045012

thermio™ eco C1

PRODUCT DESCRIPTION

The thermio™ eco C1 is a digital programmer and enables simultaneous control of central heating and hot water through a single switching output. The integrated temperature control and frost protection function save costs as no additional room thermostat for the control of the central heating is required.

DOCUMENTS & DOWNLOADS

Instructions-thermio-eco-C1


BENEFITS

  • Convenient, automatic change from summer to winter time
  • Easy and fast installation
  • Up to 3 ON/OFF commands (selectable in pairs) per day provide a comfortable room climate
  • Individual programs are saved and continue to be available even after a power failure
  • Cost savings through integrated temperature controland frost protection function as no additional roomthermostat for the control of the central heating isrequired
  • Increased comfort through wide temperature control range
  • Convenient and simple reading of information thanks to the back-lit display, even in low-light conditions
  • Simultaneous control of central heating and hot water through a single switching output
  • Short-term and need-based heating through Boost function

APPLICATIONS

  • Boiler
  • combination boiler
  • Domestic heating systems for heating and hot water
  • Pump-controlled central heating systems
  • Gravity heating systems

SPECIFICATIONS

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Battery replacement time (power reserve)
> 30 Days (Programs stored in EEPROM)
Curret output
Changeover, potential free
Current capacity - ohmic load
3 A / 250 V AC
Current capacity - inductive load cos.phi 0.6
1 A / 250 V AC
Rated impulse withstand voltage (Uimp)
4 kV
Accuracy
± 1 Second /Day at 20 °C
Battery
CR2032
Control function
Heating
Control type
2- Point (ON/OFF)
Hysteresis
±0,5 K / ±1 K
Control range
+5 °C ... +35 °C
 
+10 °C (+5 °C ... +20 °C frost protection)
control accuracy
±0,5 °C
Sensor (thermistor)
100 K (at 25 °C) NTC

Power connection

Device
Screw terminal with wire protection max. 2.5 mm²

Operating specifications

Operating mode
RUN/AUTO
Manual switch
Boost time
 
Advance
Channels
1
Program
7 days
 
5-2 days
 
1-7 Days
 
Advance
 
Boost
 
Holiday program
 
Individual programming (max. 3 ON/OFF switching times)
 
Daily program (ON/OFF)
 
Weekly program (ON/OFF)

Display and format

Resolution
Room temperature 0.1 °C
 
Temperature setpoint 1 °C
 
Day time 1 minute
Display lighting
Light blue
Time format
12-hour format (AM/PM)
 
24-hour format
Shortest switching time
Boost 1, 2, 3 hours
 
ON/OFF 10 minutes
 
Program Time 10 minutes
Room temperature display
+10 °C ... +50 °C
Summer/winter time
Automatic summer/winter time change
Clock
Digital
Status indicator
Operation mode
 
Status display heating (LED)

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
±0 °C ... +50 °C
Temperature (storage)
-20 °C ... +50 °C

General specifications

Colour
White/Grey
Weight
330 g
Material
Plastic ABS
Dimension
125 x 89 x 35 mm
Mounting
Surface mounted

Compliance with standards

ErP class
I
ErP function
ON/OFF room thermostat
ErP Description
A room thermostat that controls the ON/OFF operation of a heater.
ErP contribution to seasonal characteristic space heating energy efficiency
1 %
Protection type
IP20
Protection class
II, according to corresponding mounting
Pollution degree
2
Approval mark
CE
 
Energy Saving Trust
Standards and guidelines
EN 60730-1
 
Mode of operation and additional properties: Type 1.B

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS