thermio™ eco – thermio™ eco C2

ITEM-NO. 04.07.0006.1 / EAN-CODE 4010940045029

thermio™ eco C2

PRODUCT DESCRIPTION

The thermio™ eco C2 is a digital programmer and enables individual control of central heating and hot water through two independent switching outputs. The integrated temperature control and frost protection function save costs as no additional room thermostat for the control of the central heating is required.

DOCUMENTS & DOWNLOADS

Instructions-thermio-eco-C2


BENEFITS

  • Convenient, automatic change from summer to winter time
  • Easy and fast installation
  • Cost savings through integrated temperature controland frost protection function as no additional roomthermostat for the control of the central heating isrequired
  • Up to 3 ON/OFF commands (selectable in pairs) per day provide a comfortable room climate
  • Individual programs are saved and continue to be available even after a power failure
  • Increased comfort through wide temperature control range
  • Convenient and simple reading of information thanks to the back-lit display, even in low-light conditions
  • Individual control of central heating and hot water through two independent switching outputs
  • Short-term and need-based heating through Boost function

APPLICATIONS

  • Boiler
  • combination boiler
  • Domestic heating systems for heating and hot water
  • Pump-controlled central heating systems
  • Gravity heating systems

SPECIFICATIONS

Electrical Data

Supply voltage
AC 230 V ± 10% 50-60 Hz
Battery replacement time (power reserve)
> 30 Days (Programs stored in EEPROM)
Curret output
Changeover, potential free
Current capacity - ohmic load
3 A / 250 V AC
Current capacity - inductive load cos.phi 0.6
1 A / 250 V AC
Rated impulse withstand voltage (Uimp)
4 kV
Accuracy
± 1 Second /Day at 20 °C
Battery
CR2032
Control function
Heating
Control type
2- Point (ON/OFF)
Hysteresis
±0,5 K / ±1 K
Control range
+5 °C ... +35 °C
 
+10 °C (+5 °C ... +20 °C frost protection)
control accuracy
±0,5 °C
Sensor (thermistor)
100 K (at 25 °C) NTC

Power connection

Device
Screw terminal with wire protection max. 2.5 mm²

Operating specifications

Operating mode
RUN/AUTO
Manual switch
Boost time
 
Advance
Channels
2
Program
7 days
 
5-2 days
 
1-7 Days
 
Advance
 
Boost
 
Holiday program
 
Individual programming (max. 3 ON/OFF switching times)
 
Daily program (ON/OFF)
 
Weekly program (ON/OFF)

Display and format

Resolution
Room temperature 0.1 °C
 
Temperature setpoint 1 °C
 
Day time 1 minute
Display lighting
Light blue
Time format
12-hour format (AM/PM)
 
24-hour format
Shortest switching time
Boost 1, 2, 3 hours
 
ON/OFF 10 minutes
 
Program Time 10 minutes
Room temperature display
+10 °C ... +50 °C
Summer/winter time
Automatic summer/winter time change
Clock
Digital
Status indicator
Operation mode
 
Status display heating (LED)

Operating conditions

Humidity (operating)
10 % ... 90 % relative humidity, non-condensing
Humidity (storage)
10 % ... 90 % relative humidity, non-condensing
Temperature (operation)
±0 °C ... +50 °C
Temperature (storage)
-20 °C ... +50 °C

General specifications

Colour
White/Grey
Weight
330 g
Material
Plastic ABS
Dimension
125 x 89 x 35 mm
Mounting
Surface mounted

Compliance with standards

ErP class
I
ErP function
ON/OFF room thermostat
ErP Description
A room thermostat that controls the ON/OFF operation of a heater.
ErP contribution to seasonal characteristic space heating energy efficiency
1 %
Protection type
IP20
Protection class
II, according to corresponding mounting
Pollution degree
2
Approval mark
CE
 
Energy Saving Trust
Standards and guidelines
EN 60730-1
 
Mode of operation and additional properties: Type 1.B

DIMENSIONAL DRAWING

CIRCUIT DIAGRAMS